Organize My Drawer - Custom Acrylic Drawer Organizers

Try Design Tool

apply
x
x
addhorizontal
add vertical
delete line
distribute lines
Distribute Lines Active
Select lines and click "Apply" below.
Apply
Cancel
measure tool
Measuring Tool Active
Click outside the measure area or press escape "ESC" to deactivate.
Close Measure Tool
HelpTutorial
zoom in
zoom out
fit
zoom
Clear All
3D Preview
Price: $34.75

Make sure to click "Apply" above if you make changes to your organizer dimensions.

Enhance your Organizer

Our new liners will enhance the appearance and performance of your new organizer.

This deep brown synthetic leather will definitely add class to your shelf or organizer. Made from polyurethane, this wipe-able and durable material is similar to vinyl but with a more exquisite appearance and texture. 100% Polyurethane adhered on polystyrene backing.
As featured in House Beautiful magazine, this limited-edition fabric named Dapper Cloud is a neutral fabric that plays well in the light. Hints of gray and tan make it excellent choice for any drawer or shelf! 56% rayon/ 44% polyester fabric adhered to styrene backing. While supplies last.
This light green linen fabric brings a fresh, clean look to any drawer or shelf! Very calm shade that works as a neutral. 100% polyester fabric adhered to styrene backing.
Tangerine is a stunning orange! This linen fabric brings a bright freshness to any drawer or shelf! 100% polyester fabric adhered to styrene backing.
This fresh vanilla linen fabric is a great neutral choice. The texture alone adds visual interest to any drawer or shelf! 100% polyester fabric adhered to styrene backing.
This yellow linen adds a pop of color to any drawer or shelf! Use this liner when you are ready for a bold choice! 100% polyester fabric adhered to styrene backing.
Graphite velvet is a very modern take on traditional black velvet. This fabric is luxurious! Add a richness to any drawer or shelf! 100% polyester fabric adhered to styrene backing.
Milano Velvet Lipstick is not for the faint of heart! Lipstick is a bright and bold red that will not be forgotten! Add vibrancy to any drawer or shelf! 100% polyester fabric adhered to styrene backing.
Looking for a neutral, rich velvet? Look no further! Milano Velvet Sand will work with any décor! Add a richness to your drawer or shelf! 100% polyester fabric adhered to styrene backing.
Ready for a rich, deep blue? Look no further than Milano Velvet Slate. This luxurious velvet begs to be shown off in any drawer or shelf! 100% polyester fabric adhered to styrene backing.
Zodiac silver has a wipeable surface with a light-catching metallic finish. Works as a neutral or to lend visual interest to any drawer or shelf! 100% polyurethane fabric adhered to styrene backing.
-
x
Measurement Conversion

⅛ = 0.125
¼ = 0.25
⅜ = 0.375
½ = 0.5
⅝ = 0.625
¾ = 0.75
⅞ = 0.875

Are you sure you would like to use this template? Using the template will remove any lines on your canvas and replace them with the template layout.

Chosing to load the design will reload the current page. Any unsaved work will be lost. This design can be edited or copied as a new design.

Chosing to load the design will reload the current page. Any unsaved work will be lost. This design is locked and can only be copied into a new design.

Any unsaved changes may be lost. Would you like to conitnue to a new design?

Are you sure you would like to clear the entire canvas?

Are you sure you would like to delete that line?

The dimensions are invalid.

We build your organizer to the exact dimensions you provide.

Depth: "
Width: "
Height: "


Important Notes:
1. Typical organizer dimensions should be 1/8"-1/4" less than the actual interior drawer measurements.
2. Your organizer measurements must allow clearance for uneven drawer walls, exposed screw heads, etc.
3. Usually, organizer heights are 1/2 to 3/4 the height of your drawer sides.


By checking "I Approve," you indicate that you have verified your measurements, you have read the Important Notes above, and that you approve your design for manufacture.
I Approve

Would you like to fit or crop your current drawer in the new dimensions?

Fit: The walls will be resized to fit in the new drawer dimensions.

Crop: The walls will maintain size and spacing. The current layout will align with the center of the new drawer dimensions.

One of the following needs corrected:

1. A wall does not intersect with another wall in the opposite orientation.

2. Two walls with the same orientation are too close, touching or overlapping.

3. A wall has an overhang that is too short beyond an intersection.

One of the following needs corrected:

1. A wall does not intersect with another wall in the opposite orientation.

2. Two walls with the same orientation are too close, touching or overlapping.

3. A wall has an overhang that is too short beyond an intersection.

Click "Hide This Pop-Up" to disable this message.

The wall placement of this drawer design is invalid. One of the below issues has occured:

1. Two parallel walls are within 1 inches of each other.

2. Two perpendicular walls are within 1 inches of each other.

3. The ends of two parallel walls on the same line are within 1 inches of each other.

Click "Hide This Pop-Up" to disable this message.

The wall placement of this drawer design is invalid. One of the below issues has occured:

1. Two parallel walls are within 2 inches of each other.

2. Two perpendicular walls are within 2 inches of each other.

3. The ends of two parallel walls on the same line are within 2 inches of each other.

These proximity distances will be reduced if the drawer height is reduced to below 4 inches.

Click "Hide This Pop-Up" to disable this message.

The wall placement of this drawer design is invalid. One of the below issues has occured:

1. Two parallel walls are within 3 inches of each other.

2. Two perpendicular walls are within 3 inches of each other.

3. The ends of two parallel walls on the same line are within 3 inches of each other.

These proximity distances will be reduced if the drawer height is reduced to below 5 inches.

Click "Hide This Pop-Up" to disable this message.

Project title is required.

Your drawer design () has been saved.

This action can only be performed in edit mode.

The measurement tool displays measurements of a two dimensional area (rectangle) in inches. The measure tool rectangle can be stretched by grabbing-dragging the corners and moved by grabbing-dragging the middle and outer lines. When it has been resized, new measurements are displayed.
When measuring compartments, ensure the edges of the measure tool don't cover or overlap the walls in your design.

See the tutorial video for more information.

The distribution line tool distributes a set of vertical or horizontal walls evenly across the entire width or depth of the canvas, snapping to the nearest 1/8" increment. Select the desired walls to be distributed and click "Apply" below the activation button.
If the line separation measurement is critical, we recommend verifying with the Measure Tool.

See the tutorial video for more information.

There are limits to the size of drawer organizer products.
The maximum depth and width are restricted to 24 in. x 39 in. or 39 in. x 24 in.
The minimum allowable depth is 2 in. and minimum width is 2 in. The height is limited between 1 in. and 6 in.
If the values selected are outside those limits, the tool will recalculate to allowable dimensions.

Any unsaved changes will be lost.

We build to your exact dimensions. These values should be slightly smaller than your actual drawer measurements.

See HELP for more information.

This design can NOT be modified while it is in your shopping cart. Please complete your purchase, remove the product from your shopping cart before editing, or continue to copy as a new design.

The changes to your design dimensions have not been applied.

Design Tool Help

 
DESIGN TOOL HELP
 
  • How to create dividers and compartments:
  1. Each blank organizer canvas includes four walls and a bottom to begin with.
  2. Use the ADD HORIZONTAL, ADD VERTICAL buttons to create divider walls.  
  3. Click a line to select it for modification (turns green).  Click again or on open space to de-select the line (turns grey).
  4. Click and drag the center point or line to move and place them.
  5. Click and drag the end points to adjust divider line length.
  6. Use the DELETE LINE button to remove a line.
  7. Use DITRIBUTE LINES to spread vertical or horizontal lines evenly across the organizer width or depth evenly.
  8. Use MEASURE TOOL to use a re-sizable rectangle to measure your compartment dimensions.
  • How to measure so my organizer fits properly:
  1. Using a flexible measuring tape, measure the drawer opening in various places, to the nearest 1/8" (along the top & bottom, left, middle, & right, and the front, center & back).
  2. Reduce your DEPTH and WIDTH measurements by ⅛"  to ¼" to allow room for proper clearance and to avoid any screws or obstructions.
  3. If you have larger obstructions in the drawer, you may need to reduce your measurements more.
  4. Measure the drawer wall HEIGHT and determine how much smaller your organizer height should be, we recommend ½ to ¾ the drawer height (typically 2").
  5. Use these measurement calculations as your ORGANIZER DIMENSIONS in the design tool.  Remember, the organizer MUST be smaller than your drawer and the drawer opening.
  • How to create an empty organizer to start my design:
  1. Log In
  2. Select START BUILDING
  3. Enter your organizer PROJECT TITLE
  4. Enter your organizer dimensions (see above)
  5. Create your organizer compartments (see above)
  6. PREVIEW your drawer
  7. SAVE your drawer design
  8. REVIEW/BUY
  9. If it's great, SHARE IT in our product GALLERY
  • Design considerations that impact the price:
  1. Product pricing is adjusted by the amount of acrylic required to build your organizer and the complexity of your design.
  2. Organizer dimensions (D, W, H)
  3. Quantity of divider walls and their dimension
  4. Lengths of each joint
  5. Square inches of acrylic required
  6. Organizers with less complex designs, shorter dividers, shorter walls, and smaller outer dimensions cost less.
  • How to use templates:
  1. Log In
  2. Select START BUILDING
  3. Enter your organizer PROJECT TITLE
  4. Enter your organizer dimensions (see above)
  5. Select LOAD TEMPLATE to display template drop-down panel
  6. Scroll left-right to view templates and hover over template image to show template name
  7. Click LOAD on template image to import the template layout into your design canvas
  8. Clicking HIDE TEMPLATES closes the template drop-down panel.
  9. Make any adjustments as necessary
  10. PREVIEW your drawer
  11. SAVE your drawer design
  12. REVIEW/BUY
  13. IF it's great, SHARE IT in our product GALLERY
  • How to save and retrieve my designs:
  1. First create and PREVIEW your drawer organizer
  2. Enter an organizer PROJECT TITLE
  3. Click the SAVE DESIGN button to save it to your account.
  4. To retrieve a saved design click MY DESIGNS to display designs drop-down panel
  5. Scroll left-right to view your designs and hover over design image to show design name
  6. Click LOAD on design image to import the design into a new design canvas
  7. Clicking HIDE DESIGNS closes the design drop-down panel.
  • How to share my designs in the gallery:

If after purchasing and using your organizer, you are excited to share your creative genius, do the following:

  1. Take a color photo of your drawer organizer in use.
  2. LOG IN
  3. Select MY ACCOUNT
  4. Locate your organizer design in the VIEW tab, MY DRAWERS area, and click SHARE link on the right, just under EDIT and COPY, and left of ADD TO CART button.
  5. Enter a Product Title
  6. Enter a product description (discuss your organizer's purpose, compartments that hold unique items, other uses for the design, etc.)
  7. Select CHOOSE FILE and locate your image from your computer directory, and then select UPLOAD.
  8. Select the appropriate CATEGORIES (more than one is allowed)
  9. Click SUBMIT to send your nomination to our staff for review
  10. If your design is approved, it will show up in the product GALLERY for others to view and import
  11. Occe your design is placed in the GALLERY, it is locked from modifications; however, a COPY can be made.
  • Size limitations:
  1. Depth and Width cannot be smaller than 2"
  2. Depth and Width cannot be larger than D24" x W39" or D39" x W24"
  3. Height cannot be smaller than 1"
  4. Height cannot be larger than 6"

 

How to Measure your Drawer (4 min)
Entering Organizer Dimensions (2.5 min)
Creating Compartments and Dividers (1.5 min)
Design Errors and Limitations (4.5 min)
Zoom (1.5 min)
Clear All vs. New Design (1.2 min)
Distributing Lines Evenly (1.7 min)
Fit vs. Crop (2.5 min)
Using the Measure Tool (2.5 min)
Using Templates (2 min)
Your Designs (1.5 min)
Organization and Imagination
Practically Perfect Custom Drawer Organizers
Drawers The Way I Want Them
See How Easy It Is
How to Measure your Drawer (4 min)
Entering Organizer Dimensions (2.5 min)
Creating Compartments and Dividers (1.5 min)
Design Errors and Limitations (4.5 min)
Zoom (1.5 min)
Clear All vs. New Design (1.2 min)
Distributing Lines Evenly (1.7 min)
Fit vs. Crop (2.5 min)
Using the Measure Tool (2.5 min)
Using Templates (2 min)
Your Designs (1.5 min)
Organization and Imagination
Practically Perfect Custom Drawer Organizers
Drawers The Way I Want Them
See How Easy It Is